 |
Locomotive parts
|
BDBD :  |
Brass dome (please state the model) |
27,90 € |
HK10HK10 :  |
Handrail knob (10 pcs.) |
8,70 € |
CCBRCCBR :  |
Centre buffers, Roundhouse fitting (2 pcs.) |
13,30 € |
CCBGCCBG : |
Centre buffers, M3 stud fitting with nut (2 pcs.) |
13,30 € |
NPNP :  |
Locomotive number plates , etched brass.
Sold as a set of numbers 1 to 10, one pair of each |
14,60 € |
ABAB :  |
Axle bush, brass 1/4" bore |
1,80 € |
AB4AB4 : |
Axle bush, brass 1/4" bore (4 pcs.) |
6,70 € |
ACAACA :  |
axle crank assembly, axle 1/4" dia stainless steel with squared ends complete with 2 plain outside cranks 5/16" throw (self quartering). |
29,40 € |
AXLEAXLE : |
axle only |
12,20 € |
|
 |
Steam oil
| |
 |
Gas filling
|
GFAGFA : |
Gas filler adaptor - EN417 Thread |
31,20 € |
GFVGFV :  |
Gas filler valve - Threaded M4,5 x0,5 |
10,40 € |
|
 |
Gas jet
| |
 |
Gas tank with fittings
Gas tanks are all fully finished, pressure tested and certified
(conforms to the Pressure Equipment Directive 97/23/EC)
and are supplied complete with gas regulator and gas filler valve.
Outlet pipes are all fitted with our standard 1/4" x 40ME union nut and nipple.
All are capable of holding butane, iso-butane or butane/propane mixed gas
in an operating temperature upto but not exceeding 65 degrees celcius.
|
GTAGTA :  |
Dimensions: 25,4x93mm, volume 32,29ml;
as on Lady Anne, Billy, William, Katie and Russell |
151,10 € |
GTBGTB :  |
Dimensions: 25,4x88mm, volume 30,35ml;
as on Bertie, Sammie |
151,10 € |
GTDGTD :  |
Dimensions: 84x45mm, volume 40,9ml;
as on Millie |
200,50 € |
GTEGTE :  |
Dimensions: 27X42X87mm, volume 39,9ml;
as on Fowler |
200,50 € |
GTHGTH : |
Dimensions: 30x85mm, volume 32,3ml;
as on Darjeeling B Class |
9,90 € |
GTLGTL :  |
Dimensions: 19x93mm, volume 30ml;
as on Tom Rolt |
151,10 € |
|
 |
Boiler and gas tank
Internal gas firing, supplied complete with safety valve, pressure gauge, steam regulator, gas burner, gas tank and gas regulator.
| |
 |
Gas burner
| |
 |
Regulator
| |
 |
Displacement lubricator
| |
 |
Safety valve
5/16" x 32
| |
 |
Pressure gauge
|
PGPG : |
3/4" dia. 0-80 psi. |
48,00 € |
|
 |
Wheel
Disc pattern. Steel, bored 1/4" with grub screw, nickel-plated, flanged or flangeless.
|
WDWD : |
wheel diam. 33mm |
9,90 € |
WDIWDI : |
wheel diam. 33mm, insulated |
14,70 € |
WD42WD42 : |
wheel diam. 42mm, insulated |
15,40 € |
|
 |
Cylinder assembly
Slide valve type. Sold in pairs.
|
CC : |
9/16" bore x 5/8" stroke |
258,00 € |
|
|
Service Kit for Cylinders
|
SKC01SKC01 : |
for use with current cylinders -
having a square valve chest with a stainless steel valve chest cover, and a square slide bar attached to the rear cylinder cover by the two inside screws. |
11,60 € |
SKC02SKC02 : |
for use with older cylinders -
having a rectangular valve chest with a brass valve chest cover and a round slide bar screwed directly into the rear cylinder cover. |
11,60 € |
|
 |
Arch bar bogie kit
|
RSB3RSB3 : |
Arch bar bogie kit including wheels for 32mm gauge |
51,30 € |
RSB4RSB4 : |
Arch bar bogie kit including wheels for 45mm gauge |
51,30 € |
|
 |
Walschaerts valve-gear set
for two cylinders
| |
 |
Frame spacer
|
FSFS : |
1/4" square brass. |
5,50 € |
|
 |
Crank pin
| |
|
